|CFRTP 'MAKOTO' mini F1 We made the original mini F1 car "Makoto" with CFRTP (thermoplastic carbon fiber reinforced plastic) and aluminum.
|CFRTP Mini F1 Car Makoto ~ Run! We made a prototype EV (electric vehicle) by mounting a motor on the original mini F1 car "Makoto" made of CFRTP (thermoplastic carbon fiber reinforced plastic) and aluminum.
|Developmentt support & Production preparation assistance We manufacture prototype parts in a short delivery time. We manufacture prototype press dies in-house. We manufacture resin injection molds. We are conducting research and development on molding using composite materials. We support customers' development and production preparation.
|Sample product molding with hot stamping system A sample product of an automobile center pillar was molded with a hot stamping system consisting of AP & T's 3-stage electric furnace + transfer robot device + 1000t hydraulic press.
|Press molding using cold 1.5 GPa ultra-high-strength steel plate (ultra-high-tensile steel) Press molding using cold 1.5 GPa ultra-high-strength steel plate (ultra-high-tensile steel). We took the material data in-house and newly input it into the press molding analysis software to manufacture it.
|ATOS ScanBox 8260 (optical 3D coordinate measurement system) We have introduced an optical 3D coordinate measurement system (ATOS ScanBox8260) specialized for BIW COMP. * Shooting with a commercial vehicle
|Transform an aluminum plate into a chair-Assembly a full-scale origami chair We made a full-scale aluminum origami chair by fusing the metal processing technology of Asano Co., Ltd. and the design algorithm of Nature Architects, a venture company from the University of Tokyo.
|Laser scanner welding is used to join pressed products at high speed. High-speed welding of SUS laminated press products (sample products) with a laser scanner welding head (TRUMPF PFO-3D galvano mirror). Weld penetration of the joint is confirmed by a macro test.
|Cutting carbon fiber laminates using a water jet We support cutting of carbon fiber laminated materials such as CFRTP with a water jet cutter using the abrasive jet method.
|Large press molding with a 2000t hydraulic press machine We manufacture large parts such as sheet metal and composite materials with a 2000t hydraulic press machine.
|Manufacture of aluminum machined parts with a 5-axis machining center The handle of the CFRTP mini F1 car was made by cutting aluminum.
|Asano Co., Ltd. Headquarters / Gunma Factory This is an aerial video of Asano Co., Ltd.'s head office and Gunma factory.